Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
8" X 24" Surface Mount Drip Tray with Drain | S/S#4
$ 239.31
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 1-2 days for Stainless Steel Finish trays to ship*
Surface Mount Drip Tray, 24" x 8"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
8" X 30" Surface Mount Drip Tray with Drain | S/S#4
$ 273.95
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 2-3 days for trays to ship*
Surface Mount Drip Tray, 30" x 8"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 6" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 189.32
6" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 DAYS for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Has an angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
16" Stainless Steel Surface Mount Drain Tray with Drain | 5" x 16" x 3/4"
$ 91.41
5" x 16" x 3/4" - quality beer dispensing drip tray, includes drain for easy cleaning.
*Please allow 1-2 days for this product to ship*
The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
All exposed edges are deburred smooth for safety and appearances
Louvered Screen is Removable for Cleaning Made Easy
Stainless Steel #4 Brushed Finish
Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Made in the USA!
Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | Brass
$ 212.69
12" Brass Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD-style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in the #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Drain | 6-3/8" X 24" X 14" X 1" | S/S # 4 | 7 Faucet Holes
$ 253.72
24" Stainless Steel Wall Mount Drain Tray - 7 Faucet Holes
*Please allow 1-2 days for this product to ship*
The wall mount with drain (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
7 Faucet Holes
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 48" X ¾" Drip Tray | Recessed Beer Tray | Brass
$ 674.09
48" Brass Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount with Rinser Hole 6" X 24" X ¾" Drip Tray | Recessed | S/S # 4
$ 258.43
24" Stainless Steel Flush Mount Drain Tray w/ Drain and Rinser Hole
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
5" X 15" Surface Mount Drip Tray with Drain and Rinser Hole | S/S#4
$ 53.99
$ 73.69
5" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain and Rinser Hole
*Please allow up to 1 - 2 business days for trays to ship*
Surface Mount Drip Tray, 15" X 5"
Stainless Steel Surface Mount Drip Tray with Drain and Rinser Hole
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 18 ga. louvered screen. Drain tubes are 5/8-18 x 3-1/2" brass and secured to welded female drain fitting and rinser hole.
Rinsers sold separately
Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)
Glass Kitchen Rinser - Mirror Finish
from $ 152.86
This kitchen rinser will rinse any glass, including plastic and glass wine glasses, with high-pressure water. This limits wasting water by rinsing out the glass in a sink with a traditional faucet. This is the water-saving futuristic way to rinse a glass. The Kitchen Rinser rinses residue in seconds with easy clean-up. Designed from our highly successful restaurant and bar equipment line of glass rinsers, where this kitchen rinser was inspired from cooling a glass down from our beer drip tray line to cleaning a normal glass. This rinser is designed for any sink where there is a water supply. Using the low profile design, only one countertop hole needs to be drilled to install into any standard countertop. If you have an existing kitchen faucet sprayer or soap dispenser you can install our kitchen rinser without drilling another countertop hole and is easily installed. Our drip pan wraps around your countertop, making the runoff water/residue dispense into your sink.
Rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI we recommend you buy our Water Pressure Regulator 50 PSI.
* CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN). TOO MUCH PRESSURE CAN CAUSE DAMAGE TO THE RINSER AND CAUSE IT TO FAIL. *
Water Regulator (Sold Separately)
Highlights of our Kitchen Rinser
Industrial quality designed for high repetitive use.
The thick 16 gauge T-304 mirror Stainless Steel pan is built to last a lifetime.
5" diameter will work on larger drinking glasses and as small as baby bottles.
Easily installed, sleek low profile design.
Replaceable glass rinser.
Rinser thoroughly rinses residue with a water jet that can reach where you can't.
Do not settle for plastic or smaller diameters like other units. This unit is designed for a commercial sink or a household kitchen sink.
The rinser is replaceable if needed and is interchangeable with our glass rinsers from our draft beer line. We offer the base in mirror-polished stainless steel. The glass rinser comes with a rinser push plate available in stainless steel (brushed and mirror finish), brass mirror finish, copper mirror finish, and even a plastic star option.
* Please allow 1 week to ship *
Stainless Steel Mirror Finish w/ Mirror Finish Push Plate Drawing Spec Sheet
Stainless Steel Mirror Finish w/ Plastic Star Push Plate Drawing Spec Sheet
Stainless Steel Mirror Finish w/ Mirror Brass Push Plate Drawing Spec Sheet
Stainless Steel Mirror Finish w/ Mirror Copper Push Plate Drawing Spec Sheet
Optional way to plumb the Kitchen Glass Rinser depending on glass rinser setup
Kitchen Counter Tray Template
Replacement Sprayer Rinser O-Ring for Glass Rinser
$ 5.00
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
Replacement Sprayer Rinser O-ring for Glass Rinser. Quantity 2 is required for each glass rinser.
* PLEASE ALLOW 1-2 DAYS TO SHIP *
Rinser Assembly Spec Sheet
Wall Mount Drip Tray with Drain | 6-3/8" X 12" X 14" X 1" | S/S # 4
$ 176.45
12" Stainless Steel Wall Mount Drain Tray
*Please allow 1-2 days for this product to ship*
The wall mount with drain (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
9" Bevel Edge Drip Tray With Drain | SS #4
$ 124.70
9" Bevel Edge Drip Tray With Drain
*Please allow up to 1 - 2 days for this product to ship*
The Bevel Edge style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through and have a decorative angled edge. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray has a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Angled bottom for drainage.
Easy installation: simply drill one hole to locate and secure.
Welded corners, finished smooth for safety and appearance.
Fast draining, precision louvered screen.
Lift out screen makes cleaning easy
Center-mounted solid brass drain.
Bevel Edge Drip Tray Drawing (Spec Sheet)
19" Surface Mount Cut-Out Drain Tray, 7.5" Column | Mushroom Tower Tray| SS#4
$ 242.84
19" Surface Mount Cut-Out Drain Tray, 7.5" Column 19" x 9" x 3/4" surface mount drip tray (drain tray) for easy cleanup on beer systems.
*Please allow up to 3 weeks for this product to ship*
The Mushroom Tower-style drip trays are designed to sit on the top of any suitable surface and are relieved to fit around a Draft Arm base. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen.
Custom-Fitted for Mushroom Towers with 4-6 Faucets.
A removable slotted grid allows easy cleaning.
Conveniently catches overspills from the dispensing faucet(s).
Mushroom Tower (Surface Mount with cut out) Beer Tray Drawing (Spec Sheet)
8" X 24" Surface Mount Drip Tray with Drain | S/S#8
$ 324.31
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 2 weeks for Mirror Finish trays to ship*
Surface Mount Drip Tray, 24" x 8"
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
