ACU Precision Sheet Metal
We started as a job shop and will always continue doing so. We have two full-size laser cutting machines. We form metal, weld, grind, cut, fabricate what you need today!
We have a full line of restaurant and bar equipment, including draft beer towers and draft beer drip trays. Our expertise and dedication to the draft beer industry has earned us a well-deserved reputation for outstanding quality and unparalleled service nationwide and overseas.
Top Selling Draft Beer Equipment
Check out our best sellers
Glass Rinser for Draft Beer Drip Trays S/S#4
$ 79.17
Solid Metal Replacement Rinser with Stainless Steel perforated grid.
Please allow up to 1-2 days for this product to ship*
Our rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI, we recommend you purchase our Water Pressure Regulator 50 PSI.
*CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN) CAN DAMAGE THE RINSER AND CAUSE IT TO FAIL *
Water Regulator (Sold Separately)
Glass Rinser Drawing (Spec Sheet)
Rebuild Kit for Glass Rinser for Draft Beer Drip Trays
$ 18.49
Rebuild Kit for Solid Metal Replacement Rinser for 2019 (New) Glass Rinser
Includes:
3 - Washers
1 - Sealing Washer (Clear)
1 - Spring
4 - O-Rings (Various Sizes)
1 - Push Rod
Super Lube - Synthetic grease, food-safe, NSF approved.
Please allow up to 1-2 days for this product to ship
Rebuild Kit Spec Sheet
All Rinser Trays and Sprayers require a
Water Regulator.
(Sold Separately)
FloJet In-Line Water Pressure Regulator 50 PSI
$ 57.98
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
* PLEASE ALLOW 1-2 DAYS TO SHIP *
FloJet In-Line Water Pressure Regulator - 1750302C. For draft beer drip trays with rinser holes. View all Draft Beer Drip Trays with Rinser Holes.
This is a FloJet Water Regulator that is sold by ACU Precision Sheet Metal. This water regulator has a built-in check valve that reduces inlet water pressure to a safe level for use with all Glass Rinser Trays. The pressure Regulator comes complete with a removable, cleanable inlet screen. The unit is pre-set from the factory at 50 PSI and uses standard plumbing connections.
* CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR HARD WATER (NOT CLEAN) CAN CAUSE DAMAGE AND RESULT IN THE GLASS RINSER FAILING. *
New Column
New Column
Length
7-1/2"
Hose Connection
1/2" NPT Male with 7/16" O.D Nipple
Inside Diameter
1/4" I.D.
Outside Diameter
1-5/8"
Pressure
Pre-set at 50 PSI
Operating Temp
33° to 150°F
Inlet water pressure
150 PSI Max
Certification
NSF
Water Regulator Drawing (Spec Sheet)
Detail Photo of Water Regulator
Polished Glass Rinser for Draft Beer Drip Trays
$ 83.46
Solid Metal Replacement Rinser with Polished Mirrored Stainless Steel perforated grid.
*Please allow up to 1-2 days for this product to ship*
Our rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI, recommend you purchase our Water Pressure Regulator 50 PSI.
*CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN) CAN DAMAGE THE RINSER AND CAUSE IT TO FAIL *
Water Regulator (Sold Separately)
Glass Rinser Drawing (Spec Sheet)
Flush Mount 5" X 16" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 139.59
16" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Brass Glass Rinser for Draft Beer Drip Trays
$ 122.59
SOLID METAL REPLACEMENT RINSER WITH POLISHED MIRRORED BRASS PERFORATED GRID.
*Please allow up to 1-2 days for this product to ship*
Our rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI, recommend you purchase our Water Pressure Regulator 50 PSI.
*CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN) CAN DAMAGE THE RINSER AND CAUSE IT TO FAIL *
Water Regulator (Sold Separately)
Brass Glass Rinser for Draft Beer Drip Trays
Flush Mount 5" X 24" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 183.82
24" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 121.41
12" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Kawasaki Teryx Secondary Clutch Tool
$ 93.18
Kawasaki Teryx Clutch Removal Tool For Secondary Clutch
*Please allow up to 1 - 2 days for this product to ship*
Designed to make the clutch belt system to be removed in the field or at home for easy installation of a new belt. This system will work on a 750 and 800 models on the Kawasaki Teryx models.
5" Stainless Steel Surface Mount Drain Tray with Drain | 5" x 5" x 3/4"
$ 43.57
5" x 5" x 3/4" - quality beer dispensing drip tray, includes drain for easy cleaning
*Please allow 1-2 days for this product to ship*
The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
All exposed edges are deburred smooth for safety and appearances
Louvered Screen is Removable for Cleaning Made Easy
Stainless Steel #4 Brushed Finish
Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Made in the USA!
Surface Mount Beer Tray Drawing (Spec Sheet)