Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
Wall Mount Drip Tray with Drain and Rinser Hole | 8" X 30" X 14" X 1" | S/S # 4 | 10 Faucet Holes
$ 554.70
30" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 10 Faucet Holes
*Please allow 3 weeks for this product to ship*
The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
10 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 48" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 310.97
48" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
8" X 36" Surface Mount Drip Tray with Drain | S/S#4
$ 303.94
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3-4 days for trays to ship*
Surface Mount Drip Tray, 36" x 8"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
Surface Mount Drip Tray with Cut Out and Drain | 8" X 14" X ¾" | 6" Flange | SS #4
$ 245.40
14" Stainless Steel Cut-Out Surface Mount, 4" Column
*Please allow 3-4 days for this product to ship*
The SMDCU (Surface Mount Drain Cut Out Drip Tray) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through and are relieved to fit around a Draft Arm base. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount with Cut-Out and Drain
Stainless Steel # 4 Brushed Finish.
Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting
Hardware Included
Made in the USA!
Surface Mount with Cut Out Beer Tray Drawing (Spec Sheet)
5" X 5" X 3/4" Surface Mount Drip Tray | No Drain | S/S # 4
$ 28.37
5" Stainless Steel Surface Mount Beer Drip Tray - No Drain
*Please allow up to 1 - 2 days for this product to ship*
The SM (Surface Mount) style drip trays are designed to sit on top of any suitable surface. Drip Trays are made of 18 GA. Stainless Steel in #4 finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 20 GA. louvered screen.
Made in the USA!
All exposed edges are deburred smooth for safety and appearances
The louvered Screen is Removable for Cleaning Made Easy
Stainless Steel #4 Brushed Finish
Perfect for your single tap beer system (AKA - Kegerator)
Surface Mount Beer Tray Drawing (Spec Sheet)
Cut Out Surface Mount Drip Tray | 7” X 12”| 3" Column Tower | S/S #4 | No Drain
$ 148.93
Surface Mount Draft Beer Drip Tray, with Cutout for a 3" Column Tower, No Drain, Stainless Steel
*Please allow up to 1 - 2 days for this product to ship*
The Surface Mount Cut Out style drip trays are designed to sit on the top of any suitable surface and are relieved to fit around a Draft Arm base. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground. All exposed edges are deburred smooth for safety and appearances. Each tray has a standard 18 ga. perforated screen.
Without drain (no hassle with drain hoses and bottles)
Simply carry to the sink for cleaning
Welded corners, finished smooth for safety and appearance.
Fast draining, precision perforated screen.
Lift out screen makes cleaning easy
Surface Mount with Cut Out Beer Tray Drawing (Spec Sheet)
Cut Out Surface Mount Drip Tray | 7” X 12”| 3" Column Tower | Brass Mirror Polished | No Drain
$ 243.37
Surface Mount Draft Beer Drip Tray, with Cutout for a 3" Column Tower, No Drain, Brass
*Please allow up to 3 weeks for this product to ship*
The Surface Mount Cut Out style drip trays are designed to sit on the top of any suitable surface and are relieved to fit around a Draft Arm base. Drip Trays are made of 16 ga. Brass in #8 mirror finish. The corners and seams are welded and ground. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen.
Without drain (no hassle with drain hoses and bottles)
Simply carry to the sink for cleaning
Welded corners, finished smooth for safety and appearance.
Fast draining, precision perforated screen.
Lift out screen makes cleaning easy
Surface Mount with Cut Out Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | S/S # 4 | 10 Faucet Holes
$ 554.70
30" Stainless Steel Wall Mount Left Drain Tray with Rinser Hole - 10 Faucet Holes
*Please allow 3 weeks for this product to ship*
The wall mount with left drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
10 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Drain and Right Rinser Hole | 8" X 36" X 14" X 1" | S/S # 4 | 12 Faucet Holes
$ 641.68
36" Stainless Steel Wall Mount Drain Tray with Right Rinser Hole - 12 Faucet Holes
*Please allow 3 weeks for this product to ship*
The wall mount with drain and right rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
12 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Economy Draft Arm 3" X 12" | 3 Faucet Draft Beer Tower Column Tower S/S # 6
$ 85.78
"Economy" Draft Arm 3" X 12" Tall | 3 Faucet Hole Draft Beer Tower Column Tower S/S # 6
*Please allow up to 2 weeks for this product to ship*
This Draft Arm (Draft Beer Tower) is a 3" X 12" Tower in Stainless Steel #6 Brushed Finish. The removable cap makes it easy to assemble. The flanges are welded to the tubing. The flanges have 4 countersunk holes for mounting. This is our Economy Model that is a popular seller that is still made of good quality. Our standard Draft Beer Column Tower can be found online as well (our standard tower has the seamless joint) this tower does not. This column tower is for three faucets of draft beer.
Stainless Steel # 6 Finish
Made in the USA!
Draft beer Column towers are a perfect solution for your home bar
5" X 40" X 3/4 Surface Mount Drip Tray | No Drain | S/S # 4
$ 125.72
40" Stainless Steel Surface Mount Beer Drip Tray - No Drain
*Please allow up to 3-4 days for this product to ship*
The SM (Surface Mount) style drip tray is designed to sit on top of any suitable surface. Our Drip Trays are made of 18 GA. Stainless Steel in #4 finish Brushed Finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 GA. louvered screen.
Made in the USA!
All exposed edges are deburred smooth for safety and appearances
Louvered Screen is Removable for Cleaning Made Easy
Stainless Steel #4 Brushed Finish
Perfect for your single tap beer system (AKA - Kegerator)
Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | Brass
$ 212.69
12" Brass Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 DAYS for this product to ship*
The FMD-style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in the #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Drain | 6-3/8" X 24" X 14" X 1" | S/S # 4 | 7 Faucet Holes
$ 253.72
24" Stainless Steel Wall Mount Drain Tray - 7 Faucet Holes
*Please allow 1-2 days for this product to ship*
The wall mount with drain (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
7 Faucet Holes
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Drain and Rinser Hole | 8" X 24" X 14" X 1" | S/S # 4 | 8 Faucet Holes
$ 472.90
24" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 8 Faucet Holes
*Please allow 1-2 days for this product to ship*
The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
8 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Drain and Rinser Hole | 8" X 36" X 14" X 1" | S/S # 4 | 10 Faucet Holes
$ 641.68
36" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 10 Faucet Holes
*Please allow 1-2 days for this product to ship*
The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
10 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)