Flush Mount w/ Center Drain and Offset Rinser Hole 6" X 24" X ¾" Drip Tray | Recessed | S/S # 4 $ 258.43

24" Stainless Steel Flush Mount Drain Tray w/ Center Drain and Offset Rinser Hole *Please allow 3 weeks for this product to ship* The Flush Mount with Center Drain and Offset Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Center Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Offset Rinser Hole (Rinsers sold separately) Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)

8" X 24" Surface Mount Drip Tray with Drain and Rinser Hole | S/S#4 $ 256.04

8" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain and Rinser Hole *Please allow up to 1-2 days for trays to ship* Surface Mount Drip Tray, 24" x 8" Stainless Steel Surface Mount Drip Tray with Drain and Rinser Hole The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole. Rinsers sold separately Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)

Flush Mount w/ Right Drain and Rinser Hole 6" X 24" X ¾" Drip Tray | Recessed | S/S # 4 $ 258.43

24" Stainless Steel Flush Mount Drain Tray w/ Right Drain and Rinser Hole *Please allow 3 weeks for this product to ship* The Flush Mount with Right Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Right Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Rinser Hole (Rinsers sold separately) Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)

-30% sale

5" X 10" Surface Mount Drip Tray with Drain and Rinser Hole | S/S#4 $ 49.50 $ 69.89

5" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain and Rinser Hole *Please allow up to 1 - 2 business days for trays to ship* Surface Mount Drip Tray, 10" X 5" Stainless Steel Surface Mount Drip Tray with Drain and Rinser Hole The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 18 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole. Rinsers sold separately Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)

Mirror Polished Stainless Steel | 8" X 39" Surface Mount Drip Tray with Drain $ 419.96

8" Wide Surface Mount Beer Drip Tray with Drain *Please allow up to 3 weeks for trays to ship* Surface Mount Drip Tray, 39" x 8" Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Surface Mount Beer Tray Drawing (Spec Sheet)

Flush Mount 5" X 30" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8 $ 266.42

30" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 3 weeks for this product to ship* The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 ga. Stainless Steel in #8 Mirror finish.The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. Stainless Steel #8 Mirrored Finish Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)

Draft Beer T-Tower | 3" Single Pedestal | 16" Box 5 Hole Face Plate | S/S # 4 $ 322.34

"T" Draft Beer Tower - 5 Faucets - Stainless Steel *Please allow up to 3-4 days for this product to ship* T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #4 brushed finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 3" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959. Face Plate is Removable for Quick Installation of Beer Lines Made In the USA Flanges on the pedestals are welded to the tubing = NO Dirt Catching =) 4 countersunk holes for mounting. Stainless Steel in #4 brushed finish T-Tower Drawing (Spec Sheet)

Wall Mount Drip Tray with Drain | 6-3/8" X 24" X 14" X 1" | S/S # 4 | 4 Faucet Holes $ 253.72

24" Stainless Steel Wall Mount Drain Tray - 4 Faucet Holes *Please allow 1-2 days for this product to ship* The wall mount with drain (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 4 Faucet Holes Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

Wall Mount Drip Tray with Right Drain and Rinser Hole | 8" X 30" X 14" X 1" | S/S # 4 | 10 Faucet Holes $ 554.70

30" Stainless Steel Wall Mount Right Drain Tray with Rinser Hole - 10 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with right drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 10 Faucet Holes Rinser Hole (Rinsers sold separately) All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

Wall Mount Drip Tray with Double Drains and Rinser Holes | 8" X 48" X 14" X 1" | S/S # 4 | 12 Faucet Holes $ 853.40

48" Stainless Steel Wall Mount Double Drain and Rinser Holes Tray - 12 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with double drains (WM-DD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 12 Faucet Holes Double Rinser Holes (Rinsers sold separately) All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Double Drains to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

Wall Mount Drip Tray with Double Drains and Rinser Holes | 8" X 48" X 14" X 1" | Stainless Steel Mirror Finish | 16 Faucet Holes $ 1,045.86

48" Stainless Steel Mirror Finish Wall Mount Double Drain Tray with Rinser Holes - 16 Faucet Holes *Please allow 3 weeks for this product to ship* The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 16 Faucet Holes Double Rinser Holes (Rinsers sold separately) All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Double Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. Wall Mount Beer Tray Drawing (Spec Sheet)

Wall Mount Drip Tray with Drain | 6-3/8" X 36" X 14" X 1" | S/S # 4 | 12 Faucet Holes $ 386.65

36" Stainless Steel Wall Mount Drain Tray - 12 Faucet Holes *Please allow 1-2 days for this product to ship* The wall mount with drain (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 12 Faucet Holes Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

Flush Mount 5" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8 $ 132.80

8" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The FMD-style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. Stainless Steel in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. Stainless Steel #8 Mirrored Finish Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)

Flush Mount 8" X 30" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4 $ 340.53

30" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 ga—-perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)

Flush Mount with Rinser Hole 6" X 8" X ¾" Drip Tray | Recessed | Brass $ 340.13

8" Brass Flush Mount Drain Tray w/ Drain and Rinser Hole *Please allow 1-2 days for this product to ship* The Flush Mount with drain and rinser hole style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 gauge brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 18-gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. High-quality Brass Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Rinser Hole (Rinsers sold separately) Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)

Find the best draft beer equipment here!

ALL Products

Draft Beer Drip Trays

Draft Beer Towers

Draft Beer Accessories

Other Products

Family owned & Operated

FREE SHIPPING

Trust

Made In the USA and Supported in America