Glass Rinser for Draft Beer Drip Trays S/S#4
Glass Rinser for Draft Beer Drip Trays S/S#4
$ 79.17
Solid Metal Replacement Rinser with Stainless Steel perforated grid.   Please allow up to 1-2 days for this product to ship* Our rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI, recommend you purchase our Water Pressure Regulator 50 PSI. *CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN) CAN DAMAGE THE RINSER AND CAUSE IT TO FAIL * Water Regulator (Sold Separately)   Glass Rinser Drawing (Spec Sheet)
Rebuild Kit for Glass Rinser for Draft Beer Drip Trays
Rebuild Kit for Glass Rinser for Draft Beer Drip Trays
$ 18.49
Rebuild Kit for Solid Metal Replacement Rinser for 2019 (New) Glass Rinser Includes: 3 - Washers  1 - Sealing Washer (Clear)    1 - Spring  4 - O-Rings (Various Sizes) 1 - Push Rod  Super Lube - Synthetic grease, food-safe, NSF approved.    *Please allow up to 1-2 days for this product to ship* All Rinser Trays and Sprayers require a Water Regulator. (Sold Separately) 
FloJet In-Line Water Pressure Regulator - ACU Precision Sheet Metal
FloJet In-Line Water Pressure Regulator 50 PSI
$ 34.06
*** FOR USE ONLY WITH  GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***   * PLEASE ALLOW 1-2 DAYS TO SHIP * FloJet In-Line Water Pressure Regulator - 1750302C. For draft beer drip trays with rinser holes. View all Draft Beer Drip Trays with Rinser Holes. This is a FloJet Water Regulator that is sold by ACU Precision Sheet Metal. This water regulator has a built-in check valve that reduces inlet water pressure to a safe level for use with all Glass Rinser Trays. The pressure Regulator comes complete with a removable, cleanable inlet screen. The unit is pre-set from the factory at 50 PSI and uses standard plumbing connections.       * CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR HARD WATER (NOT CLEAN)  CAN CAUSE DAMAGE AND RESULT IN THE GLASS RINSER FAILING. * New Column New Column Length 7-1/2" Hose Connection 1/2" NPT Male with 7/16" O.D Nipple Inside Diameter 1/4" I.D. Outside Diameter 1-5/8" Pressure Pre-set at 50 PSI Operating Temp 33° to 150°F Inlet water pressure 150 PSI Max Certification NSF Water Regulator Drawing (Spec Sheet) Detail Photo of Water Regulator
Polished Glass Rinser for Draft Beer Drip Trays
Polished Glass Rinser for Draft Beer Drip Trays
$ 83.46
Solid Metal Replacement Rinser with Polished Mirrored Stainless Steel perforated grid. *Please allow up to 1-2 WEEKS for this product to ship* Our rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI, recommend you purchase our Water Pressure Regulator 50 PSI. *CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN) CAN DAMAGE THE RINSER AND CAUSE IT TO FAIL * Water Regulator (Sold Separately) Glass Rinser Drawing (Spec Sheet)
Flush Mount 5
Flush Mount 5" X 16" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 139.59
16" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5
Flush Mount 5" X 24" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 183.82
24" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Brass Glass Rinser for Draft Beer Drip Trays
Brass Glass Rinser for Draft Beer Drip Trays
$ 122.59
SOLID METAL REPLACEMENT RINSER WITH POLISHED MIRRORED BRASS PERFORATED GRID. *Please allow up to 1-2 WEEKS for this product to ship* Our rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI, recommend you purchase our Water Pressure Regulator 50 PSI. *CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN) CAN DAMAGE THE RINSER AND CAUSE IT TO FAIL * Water Regulator (Sold Separately)   Brass Glass Rinser for Draft Beer Drip Trays
Flush Mount 5
Flush Mount 5" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 121.41
12" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
5
5" X 24" X 3/4 Surface Mount Drip Tray | No Drain | S/S # 4
$ 75.70
24" Stainless Steel Surface Mount Beer Drip Tray, No Drain *Please allow up to 1 - 2 days for this product to ship* The SM (Surface Mount) style drip tray is designed to sit on the top of any suitable surface. Our Drip Trays are made of 18 GA. Stainless Steel in #4 finish Brushed Finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 GA. louvered screen. Made in the USA! All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Perfect for your single tap beer system (AKA - Kegerator) Surface Mount Beer Tray Drawing (Spec Sheet)
Surface Mount Drip Tray with Drain 5
5" Stainless Steel Surface Mount Drain Tray with Drain | 5" x 5" x 3/4"
$ 43.57
5" x 5" x 3/4" - quality beer dispensing drip tray, includes drain for easy cleaning *Please allow 1-2 days for this product to ship* The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Made in the USA! Surface Mount Beer Tray Drawing (Spec Sheet)
Kawasaki Teryx Secondary Clutch Tool
Kawasaki Teryx Secondary Clutch Tool
$ 93.18
Kawasaki Teryx Clutch Removal Tool For Secondary Clutch *Please allow up to 1 - 2 days for this product to ship* Designed to make the clutch belt system to be removed in the field or at home for easy installation of a new belt. This system will work on a 750 and 800 models on the Kawasaki Teryx models. 
Surface Mount Drip Tray with Drain 5
36" Stainless Steel Surface Mount Drain Tray with Drain | 5" x 36" x 3/4"
$ 141.94
5" x 36" x 3/4" - draft beer drip tray (beer drain tray) *Please allow 1-2 days for this product to ship* The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Made in the USA! Surface Mount Beer Tray Drawing (Spec Sheet)
Surface Mount Drip Tray with Drain 5
48" Stainless Steel Surface Mount Drain Tray with Drain | 5" x 48" x 3/4"
$ 177.25
5" x 48" x 3/4" - draft beer drip tray (beer drain tray) *Please allow 1-2 days for this product to ship* The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Made in the USA! Surface Mount Beer Tray Drawing (Spec Sheet)
Draft Beer T- Tower | 3
Draft Beer T- Tower | 3" Single Pedestal |12" Box | 4 Hole Face Plate | S/S # 4
$ 283.98
"T" Style Draft Beer Tower - 4 Faucets - Stainless Steel *Please allow up to 5 - 7 days for this product to ship* T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #4 brushed finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 3" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959. Face Plate is Removable for Quick Installation of Beer Lines Made In the USA Flanges on the pedestals are welded to the tubing = NO Dirt Catching =) 4 countersunk holes for mounting. Stainless Steel in #4 brushed finish T-Tower Drawing (Spec Sheet)    
Draft Arm 3
Draft Arm 3" X 12" | 3 Faucet Draft Beer Tower Column Tower S/S # 4
$ 104.09
3" Column Draft Beer Tower - Stainless Steel - 3 hole faucet beer tower.  *Please allow up to 1 - 2 days for this product to ship* Draft Arm (Draft Beer Tower) is a 3" X 12" Tower in Stainless Steel #4 Brushed Finish. Our Draft Arms (column towers) come with Rubatex insulation and a Neoprene gasket to aid in keeping the product cold. The removable cap makes it easy to assemble. The flanges are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. This column tower is for three faucets of draft beer.  Our Draft Arms WILL NOT catch dirt in our flange! Stainless Steel # 4 Brushed Finish. Draft beer towers are a perfect solution for your home bar. Made in the USA! Rubatex insulation and a Neoprene gasket to aid in keeping the product cold. Draft Beer Column Tower Drawing (Spec Sheet)
Flush Mount 5
Flush Mount 5" X 36" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 246.28
36" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Surface Mount Drip Tray with Drain 5
24" Stainless Steel Surface Mount Drain Tray with Drain | 5" x 24" x 3/4"
$ 100.33
5" x 24" x 3/4" - Draft Beer Drip Tray (beer drain tray) *Please allow 1-2 days for this product to ship* The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Made in the USA! Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 5
Flush Mount 5" X 30" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 226.92
30" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
5
5" X 30" X 3/4 Surface Mount Drip Tray | No Drain | S/S # 4
$ 100.93
30" Stainless Steel Surface Mount Beer Drip Tray - No Drain *Please allow up to 1 - 2 days for this product to ship* The SM (Surface Mount) style drip tray is designed to sit on the top of any suitable surface. Our Drip Trays are made of 18 GA. Stainless Steel in #4 finish Brushed Finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 GA. louvered screen. Made in the USA! All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Perfect for your single tap beer system (AKA - Kegerator) Surface Mount Beer Tray Drawing (Spec Sheet)
5
5" X 36" X 3/4 Surface Mount Drip Tray | No Drain | S/S # 4
$ 113.53
36" Stainless Steel Surface Mount Beer Drip Tray - No Drain *Please allow up to 1 - 2 days for this product to ship* The SM (Surface Mount) style drip tray is designed to sit on the top of any suitable surface. Our Drip Trays are made of 18 GA. Stainless Steel in #4 finish Brushed Finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 GA. louvered screen. Made in the USA! All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Perfect for your single tap beer system (AKA - Kegerator) Surface Mount Beer Tray Drawing (Spec Sheet)

Family owned & Operated

Customer satisfaction is our top priority.

Shop Safe

Secure Payment using SSL Encryption Technology

Trust

We have earned the reputation to have the highest quality and service in the industry.

Made In the USA

All of our draft beer drip trays and draft beer towers are made in the USA!