Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
Flush Mount 6" X 45" X ¾" Drip Tray with Double Drains | Recessed | S/S # 4
$ 393.97
45" Stainless Steel Flush Mount Drain Tray, w/ Double Drains
*Please allow 3 weeks for this product to ship*
The Flush Mount with Double Drains (FM-DD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FM-DD has Drains for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Double Drains
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Center Drain and Offset Rinser Hole 6" X 48" X ¾" Drip Tray | Recessed | S/S # 4
$ 385.58
48" Stainless Steel Flush Mount Drain Tray w/ Center Drain and Offset Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Center Drain and Offset Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Center Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Offset Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Center Drain and Offset Rinser Hole 8" X 30" X ¾" Drip Tray | Recessed | S/S # 4
$ 340.53
30" Stainless Steel Flush Mount Drain Tray w/ Center Drain and Offset Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Center Drain and Offset Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Center Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Offset Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
8" X 20" Surface Mount Drip Tray with Drain and Rinser Hole | S/S#4
$ 232.91
8" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain and Rinser Hole
*Please allow up to 1-2 days for trays to ship*
Surface Mount Drip Tray, 20" x 8"
Stainless Steel Surface Mount Drip Tray with Drain and Rinser Hole
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tues are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole.
Rinsers sold separately
Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)
8" X 24" Surface Mount Drip Tray with Drain and Left Rinser Hole | S/S#4
$ 256.04
8" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain and Left Rinser Hole
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 24" x 8"
Stainless Steel Surface Mount Drip Tray with Drain and Left Rinser Hole
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole.
Rinsers sold separately
Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)
6" X 12" Surface Mount Drip Tray with Drain | S/S #4
$ 140.45
6" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain
*Please allow up to 1-2 days for Stainless Steel Brushed and Mirror Finish trays to ship*
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
8" X 20" Surface Mount Drip Tray with Drain | S/S#4
$ 217.67
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 1-2 days for Stainless Steel Brushed trays to ship*
Surface Mount Drip Tray, 20" x 8"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
10" X 20" Surface Mount Drip Tray with Drain | S/S#4
$ 257.61
10" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for Stainless Steel Brushed trays to ship*
Surface Mount Drip Tray, 20" x 10"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
10" X 12" Surface Mount Drip Tray with Drain | S/S#4
$ 214.88
10" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for Stainless Steel Brushed trays to ship*
Surface Mount Drip Tray, 12" x 10"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Right Drain and Rinser Hole 6" X 30" X ¾" Drip Tray | Recessed | S/S # 4
$ 301.33
30" Stainless Steel Flush Mount Drain Tray w/ Right Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Right Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Right Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Draft Beer T-Tower | 3" Single Pedestal | 18" Box 6 Hole Face Plate | S/S # 4
$ 369.35
"T" Draft Beer Tower - 6 Faucets - Stainless Steel
*Please allow up to 3-4 days for this product to ship*
T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #4 brushed finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 3" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959.
Face Plate is Removable for Quick Installation of Beer Lines
Made In the USA
Flanges on the pedestals are welded to the tubing = NO Dirt Catching =)
4 countersunk holes for mounting.
Stainless Steel in #4 brushed finish
T-Tower Drawing (Spec Sheet)
5" X 8" X 3/4" Surface Mount Drip Tray |No Drain | S/S # 8
$ 61.10
8" Stainless Steel Mirror Finish Surface Mount Beer Drip Tray - No Drain
*Please allow up to 2 weeks for this product to ship*
The SM (Surface Mount) style drip trays are designed to sit on the top of any suitable surface. Drip Trays are made of 18 GA. Stainless Steel in #8 mirror finish. The corners and seams are welded and ground to a mirror finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 20 GA. louvered screen.
All exposed edges are deburred smooth for safety and appearances
The louvered Screen is Removable for Cleaning Made Easy
Stainless Steel #8 Mirror Finish
Perfect for your single tap beer system (AKA - Kegerator)
Made in the USA!
Surface Mount Beer Tray Drawing (Spec Sheet)
Draft Beer T-Tower | 4" Single Pedestal | 16" Box 5 Hole Face Plate | S/S # 4
$ 414.69
"T" Draft Beer Tower - 5 Faucets - Stainless Steel
*Please allow up to 3 - 4 days for this product to ship*
T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #4 brushed finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 4" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959.
Face Plate is Removable for Quick Installation of Beer Lines
Made In the USA
Flanges on the pedestals are welded to the tubing = NO Dirt Catching =)
4 countersunk holes for mounting.
Stainless Steel in #4 brushed finish
T-Tower Drawing (Spec Sheet)
Draft Beer T- Tower |3" Double Pedestal |24" Box 8 Hole Face Plate | S/S # 4
$ 568.01
"T" Style Draft Beer Tower - 8 Faucets - Stainless Steel
*Please allow up to 1 - 2 days for this product to ship*
T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #4 brushed finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 3" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959.
Face Plate is Removable for Quick Installation of Beer Lines
Made In the USA
Flanges on the pedestals are welded to the tubing = NO Dirt Catching =)
4 countersunk holes for mounting.
Stainless Steel in #4 Brushed Finish
T-Tower Drawing (Spec Sheet)
20" Stainless Steel Drain Tray Large Barrel Head
$ 267.12
20" Stainless Steel Barrel Head Tray with Back Splash
*Please allow up to 3 weeks for this product to ship*
The Barrel Head style wall mounts are designed to mount to any suitable vertical surface directly below a barrel head type dispensing unit. Wall Mounts are made of 18 ga. Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to either a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
Barrel Head Beer Drip Tray Drawing (Spec Sheet)
