Surface Mount Drip Tray with Drain 5
8" Mirror Polished Stainless Steel Surface Mount Drain Tray with Drain | 5" X 8" X 3/4
$ 78.04
5" X 8" X 3/4" Mirror Polished Stainless Steel Surface Mount Drip Tray with Drain *Please allow 2 weeks for this product to ship* The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish. The corners and seams are welded and ground to a polished (mirror) high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #8 Mirrored Finish Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Made in the USA! Surface Mount Beer Tray Drawing (Spec Sheet)
Surface Mount Drip Tray with Drain 5
8" Stainless Steel Surface Mount Drain Tray with Drain | 5" X 8" X 3/4"
$ 47.31
5" X 8" X 3/4" - quality beer dispensing drip tray, includes drain for easy cleaning. *Please allow 1-2 days for this product to ship* The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Made in the USA! Surface Mount Beer Tray Drawing (Spec Sheet)
Surface Mount Drip Tray with Drain 5
Brass Mirror Polished | Surface Mount Drain Tray with Drain | 5" X 8" X 3/4
$ 131.03
Brass 5" X 8" X 3/4" Surface Mount Drip Tray with Drain *Please allow 3 weeks for this product to ship* The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 16 ga. Brass #8 mirror finish. The corners and seams are welded and ground to a polished (mirror) high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. All exposed edges are deburred smooth for safety and appearances The louvered Screen is Removable for Cleaning Made Easy Brass # 8 Mirror Finish Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting. Made in the USA! Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 5
Flush Mount 5" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | Brass
$ 191.02
8" Brass Flush Mount Drain Tray, w/ Drain *Please allow 3 weeks for this product to ship* The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. High-quality Brass Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5
Flush Mount 5" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 107.99
8" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 16 GA. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 16 GA. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5
Flush Mount 5" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 132.80
8" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 3 weeks for this product to ship* The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. Stainless Steel in #8 Mirror finish.The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. Stainless Steel #8 Mirrored Finish Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Louvered Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6
Flush Mount 6" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 182.60
8" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6
Flush Mount 6" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 226.09
8" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 3 weeks for this product to ship* The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 ga. Stainless Steel in #8 Mirror finish.The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. Stainless Steel #8 Mirrored Finish Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
RECESSED DRIP TRAY BRASS POLISHED 6 X 8
Flush Mount 6" X 8" X ¾" Drip Tray | Recessed Beer Tray | Brass
$ 340.13
8" Brass Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The FMD-style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 ga. brass in the #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. High-quality Brass Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8
Flush Mount 8" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 221.77
8" Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 1-2 days for this product to ship* The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment. Stainless Steel #4 Brushed Finish Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8
Flush Mount 8" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 289.48
8" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain *Please allow 3 weeks for this product to ship* The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. Stainless Steel in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. Stainless Steel #8 Mirrored Finish Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8
Flush Mount 8" X 8" X ¾" Drip Tray | Recessed Beer Tray | Brass
$ 445.48
8" Brass Flush Mount Drain Tray, w/ Drain *Please allow 3 weeks for this product to ship* The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage. High-quality Brass Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread. Made in the USA! Deburred Smooth for Safety Perforated Screen Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)

 

The Surface mount style drip trays are designed to sit on the top of any suitable surface. Trays Come Standard in 5" or 8" wide. Click to see all of our Lengths. Custom sizes, shapes and materials are welcome.

The Cut-out drip tray series is named for its design of following the flange of the our Draft Beer Draft Arm Tower. The advantage of this style is better drip coverage for the faucets. Only one hole is required through the counter-top for the drain line. The drip tray is secured with a nut and washer attached to the drain pie.

Draft Beer surface mount drip trays, flush mounted "recessed" drip trays, cut out drip trays, and all wall mounted beer trays with rinser holes.

 

The Surface Mount with Drain style drip trays are designed to sit on the top of any suitable surface. Drains are 5/8-18 x 3" brass and secured to welded female drain fitting. Trays Come Standard in 5" or 8" wide. Click to see all of our Lengths. Custom sizes, shapes and materials are welcome.

Bevel Edge Drip Trays add another reflective angle to the bar top. The BED style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through and have a decorative angled edge. Standard trays In Stock are 5" I.D. x 14" I.D. Custom sizes, shapes and materials are welcome.

Shadow boxes are perfect for installations where there is a gap between the walk-in wall and the back of a wall mounted drip tray. A shadow box creates an extruded pocket in the walk-in wall containing the beer shanks and the beer hose connections.

Flush mounted "Recessed" style drip trays are designed to mount flush to any surface with a relieved opening. Drains are 1 1/2" long, 1/2" NPT Pipe Thread with an angled bottom for drainage. Come Standard in 5" wide trays. Click to see all of our Lengths. Custom sizes, shapes and materials are welcome.

Wall mount drip trays are an excellent choice for outside of a walk-in cooler. Shanks with faucets are mounted through the drip tray directly into the walk-in. We offer a variety of pre-punched shank holes for an easy installation.

Overhang Draft Beer Tower. "Wrap Around Drip Trays" enable the tower to be mounted closer to the bar edge. Drains are 1 1/2" long, 1/2" NPT Pipe Thread.The Wrap Around mounts under the tower and cantilevers over the bar edge. A threaded drain is included

 

Family owned & Operated

Customer satisfaction is our top priority.

Shop Safe

Secure Payment using SSL Encryption Technology

Trust

We have earned the reputation to have the highest quality and service in the industry.

Made In the USA

All of our draft beer drip trays and draft beer towers are made in the USA!