Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
8" X 30" Surface Mount Drip Tray with Drain and Left Rinser Hole | Brass
$ 620.20
8" Wide Brass Surface Mount Beer Drip Tray with Drain and Left Rinser Hole
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 30" x 8"
Brass Surface Mount Drip Tray with Drain and Left Rinser Hole
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 16 ga. Brass in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole.
Rinsers sold separately
Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)
8" X 30" Surface Mount Drip Tray with Drain and Left Rinser Hole | S/S#4
$ 292.80
8" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain and Left Rinser Hole
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 30" x 8"
Stainless Steel Surface Mount Drip Tray with Drain and Left Rinser Hole
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole.
Rinsers sold separately
Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)
8" X 30" Surface Mount Drip Tray with Drain and Left Rinser Hole | S/S#8
$ 398.56
8" Wide Mirror Stainless Surface Mount Beer Drip Tray with Drain and Left Rinser Hole
*Please allow up to 1-2 days for trays to ship*
Surface Mount Drip Tray, 30" x 8"
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain and Left Rinser Hole
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole.
Rinsers sold separately
Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | Brass | 10 Faucet Holes
$ 1,309.79
30" Brass Wall Mount Left Drain Tray with Rinser Hole - 10 Faucet Holes
*Please allow 3 weeks for this product to ship*
The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
10 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Brass #8 Mirror Finish
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | Brass | 4 Faucet Holes
$ 1,309.79
30" Brass Wall Mount Left Drain Tray with Rinser Hole - 4 Faucet Holes
*Please allow 3 weeks for this product to ship*
The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
4 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Brass #8 Mirror Finish
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | Brass | 5 Faucet Holes
$ 1,309.79
30" Brass Wall Mount Left Drain Tray with Rinser Hole - 5 Faucet Holes
*Please allow 3 weeks for this product to ship*
The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
5 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Brass #8 Mirror Finish
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | Brass | 6 Faucet Holes
$ 1,309.79
30" Brass Wall Mount Left Drain Tray with Rinser Hole - 6 Faucet Holes
*Please allow 3 weeks for this product to ship*
The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
6 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Brass #8 Mirror Finish
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | Brass | 7 Faucet Holes
$ 1,309.79
30" Brass Wall Mount Left Drain Tray with Rinser Hole - 7 Faucet Holes
*Please allow 3 weeks for this product to ship*
The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
7 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Brass #8 Mirror Finish
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | Brass | 8 Faucet Holes
$ 1,309.79
30" Brass Wall Mount Left Drain Tray with Rinser Hole - 8 Faucet Holes
*Please allow 3 weeks for this product to ship*
The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
8 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Brass #8 Mirror Finish
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | Brass | 9 Faucet Holes
$ 1,309.79
30" Brass Wall Mount Left Drain Tray with Rinser Hole - 9 Faucet Holes
*Please allow 3 weeks for this product to ship*
The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
9 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Brass #8 Mirror Finish
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | S/S # 4 | 10 Faucet Holes
$ 554.70
30" Stainless Steel Wall Mount Left Drain Tray with Rinser Hole - 10 Faucet Holes
*Please allow 3 weeks for this product to ship*
The wall mount with left drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
10 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | S/S # 4 | 4 Faucet Holes
$ 554.70
30" Stainless Steel Wall Mount Left Drain Tray with Rinser Hole - 4 Faucet Holes
*Please allow 3 weeks for this product to ship*
The wall mount with left drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 16 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
4 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | S/S # 4 | 5 Faucet Holes
$ 554.70
30" Stainless Steel Wall Mount Left Drain Tray with Rinser Hole - 5 Faucet Holes
*Please allow 3 weeks for this product to ship*
The wall mount with left drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
5 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | S/S # 4 | 6 Faucet Holes
$ 554.70
30" Stainless Steel Wall Mount Left Drain Tray with Rinser Hole - 6 Faucet Holes
*Please allow 3 weeks for this product to ship*
The wall mount with left drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
6 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
Wall Mount Drip Tray with Left Drain and Rinser Hole | 8" X 30" X 14" X 1" | S/S # 4 | 7 Faucet Holes
$ 554.70
30" Stainless Steel Wall Mount Left Drain Tray with Rinser Hole - 7 Faucet Holes
*Please allow 3 weeks for this product to ship*
The wall mount with left drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
7 Faucet Holes
Rinser Hole (Rinsers sold separately)
All Rinser Trays and Sprayers require a Water Regulator (sold separately)
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)