Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
5 x 8 Surface Mount Draft Beer Drip Tray - Stainless Steel
$ 31.55
8" Stainless Steel Surface Mount Beer Drip Tray - No Drain
*Please allow up to 1 - 2 days for this product to ship*
The SM (Surface Mount) style drip trays are designed to sit on the top of any suitable surface. Drip Trays are made of 18 GA. Stainless Steel in #4 finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 GA. louvered screen.
Made in the USA! All exposed edges are deburred smooth for safety and appearances Louvered Screen is Removable for Cleaning Made Easy Stainless Steel #4 Brushed Finish Perfect for your single tap beer system (AKA - Kegerator) or espresso machine.
As Seen on Amazon.com. This is one of the best selling beer drip trays on Amazon. Buy direct from us to save money and to know you are getting an original beer pan from ACU Precision Sheet Metal.
Surface Mount Beer Tray Drawing (Spec Sheet)
Glass Rinser for Draft Beer Drip Trays S/S#4
$ 79.17
Solid Metal Replacement Rinser with Stainless Steel perforated grid.
Please allow up to 1-2 days for this product to ship*
Our rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI, we recommend you purchase our Water Pressure Regulator 50 PSI.
*CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN) CAN DAMAGE THE RINSER AND CAUSE IT TO FAIL *
Water Regulator (Sold Separately)
Glass Rinser Drawing (Spec Sheet)
Draft Arm 3" X 12" | 3 Faucet Draft Beer Tower Column Tower S/S # 4
$ 104.09
3" Column Draft Beer Tower - Stainless Steel - 3 hole faucet beer tower.
*Please allow up to 1 - 2 days for this product to ship*
Draft Arm (Draft Beer Tower) is a 3" X 12" Tower in Stainless Steel #4 Brushed Finish. Our Draft Arms (column towers) come with Rubatex insulation and a Neoprene gasket to aid in keeping the product cold. The removable cap makes it easy to assemble. The flanges are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. This column tower is for three faucets of draft beer.
Our Draft Arms WILL NOT catch dirt in our flange!
Stainless Steel # 4 Brushed Finish.
Draft beer towers are a perfect solution for your home bar.
Made in the USA!
Rubatex insulation and a Neoprene gasket to aid in keeping the product cold.
Draft Beer Column Tower Drawing (Spec Sheet)
Flush Mount 5" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 121.41
12" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 182.60
8" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 196.04
12" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 16" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 213.65
16" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 24" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 258.43
24" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 30" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 301.33
30" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 36" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 320.87
36" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 45" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 365.99
45" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 6" X 48" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 385.58
48" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 107.99
8" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 16 GA. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 16 GA. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8" X 8" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 221.77
8" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 8" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 235.19
12" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
