Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
8" X 48" Surface Mount Drip Tray with Drain and Right Rinser Hole | S/S#4
$ 400.42
8" Wide Surface Mount Beer Drip Tray with Drain and Right Rinser Hole
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 48" x 8"
Stainless Steel Surface Mount Drip Tray with Drain and Right Rinser Hole
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole.
Rinsers sold separately
Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)
6" X 30" Surface Mount Drip Tray with Drain | S/S#4
$ 223.34
6" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for Stainless Steel Brushed trays to ship*
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
7" X 30" Surface Mount Drip Tray with Drain | S/S#4
$ 250.22
7" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 2 weeks to ship*
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
8" X 36" Surface Mount Drip Tray with Drain | Brass
$ 595.59
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 36" x 8"
Brass Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 16 ga. Brass in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
10" X 39" Surface Mount Drip Tray with Drain | S/S#4
$ 366.33
10" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 39" x 10"
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
6" X 48" Surface Mount Drip Tray with Drain | S/S#4
$ 278.09
6" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.
The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
7" X 48" Surface Mount Drip Tray with Drain | Brass
$ 646.72
7" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Brass Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 16 ga. Brass in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Right Drain and Rinser Hole 6" X 36" X ¾" Drip Tray | Recessed | S/S # 4
$ 320.87
36" Stainless Steel Flush Mount Drain Tray w/ Right Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Right Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Right Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Right Drain and Rinser Hole 6" X 48" X ¾" Drip Tray | Recessed | S/S # 4
$ 385.58
48" Stainless Steel Flush Mount Drain Tray w/ Right Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Right Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Right Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount w/ Rinser Hole and Offset Drain 6" X 24" X ¾" Drip Tray | Recessed | S/S # 4
$ 519.44
24" Stainless Steel Flush Mount Drain Tray w/ Rinser Hole and Offset Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Rinser Hole and Offset Drain style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Replacement Stainless Steel Hex Nut for Glass Rinser
$ 5.00
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
Replacement Stainless Steel Hex Nut - UNS 21/32-19 for Glass Rinser. Quantity 1 is needed per glass rinser.
* PLEASE ALLOW 1-2 DAYS TO SHIP *
Rinser Assembly Spec Sheet
Flush Mount 8" X 33" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 350.30
33" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Replacement Main Body O-Ring for Glass Rinser
$ 5.00
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
Replacement Main Body O-ring for Glass Rinser. Quantity 1 is required for each glass rinser.
* PLEASE ALLOW 1-2 DAYS TO SHIP *
Rinser Assembly Spec Sheet
Super Lube for Glass Rinser
$ 2.16
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
Food Grade Super Lube (Synthetic Grease) 1cc Tube for Glass Rinser.
* PLEASE ALLOW 1-2 DAYS TO SHIP *
Rinser Assembly Spec Sheet
24" Surface Mount Cut-Out Drain Tray, 7.5" Column | Mushroom Tower Tray| Brass
$ 493.71
24" Surface Mount Cut-Out Drain Tray, 7.5" Column 24" x 11" x 3/4" surface mount drip tray (drain tray) for easy cleanup on beer systems.
*Please allow up to 3 weeks for this product to ship*
The Mushroom Tower-style drip trays are designed to sit on the top of any suitable surface and are relieved to fit around a Draft Arm base. Drip Trays are made of 16 ga. Brass in #8 mirror finish. The corners and seams are welded and ground. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 ga. perforated screen.
Custom-Fitted for Mushroom Towers with 4-6 Faucets.
A removable slotted grid allows easy cleaning.
Conveniently catches overspills from the dispensing faucet(s).
Mushroom Tower (Surface Mount with cut out) Beer Tray Drawing (Spec Sheet)
