Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
Under Bar Dispensing Cabinet | 8 Faucet Holes
$ 882.83
Under Bar Draft Beer Dispensing Cabinet - 8 Faucet Holes
*Please allow 1-3 days for this product to ship*
16" X 24" X 16"
The Shaft Box-style dispensers are designed to hang or mount underneath the bar or counter. The Shaft Boxes are available with radius or straight corners. The removable faceplate can have any variable faucet configuration you specify and can be easily replaced to change the configuration. Each box is insulated with 1" thick Styrofoam. All seams are welded and ground to either a brushed or polished (mirror) high finish. Each tray is available with a standard SS#4 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage
Integrated drip tray with drain and radius corners
Removable front panel for easy access
Under Bar Beer Tower Drawing (Spec Sheet)
8" X 20" Surface Mount Drip Tray with Drain | Brass #8
$ 431.71
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for Brass Finish trays to ship*
Surface Mount Drip Tray, 20" x 8"
Brass Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to the surface using supplied hardware. Drip Trays are made of 16 ga. Brass in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
8" X 28" Surface Mount Drip Tray with Drain | S/S#8
$ 363.33
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 2 weeks for Mirror Finish trays to ship*
Surface Mount Drip Tray, 28" x 8"
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
8" X 45" Surface Mount Drip Tray with Drain | S/S#8
$ 454.04
8" Wide Surface Mount Beer Drip Tray with Drain
*Please allow up to 3 weeks for trays to ship*
Surface Mount Drip Tray, 45" x 8"
Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain
The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through.
Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish
The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Surface Mount Beer Tray Drawing (Spec Sheet)
Brass Mirror Polished | 5" X 16" X 3/4" Surface Mount Drip Tray | No Drain
$ 152.87
5" x 16" Brass Mirror Finish Surface Mount Beer Drip Tray, No Drain
*Please allow up to 3 weeks for this product to ship*
The SM (Surface Mount) style drip trays are designed to sit on the top of any suitable surface.Drip Trays are made of 16 GA. Brass in #8 finish.The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 GA. louvered screen.
All exposed edges are deburred smooth for safety and appearances
Louvered Screen is Removable for Cleaning Made Easy
Brass # 8 Mirror Finish
Perfect for your single tap beer system (AKA - Kegerator)
Made in the USA!
Surface Mount Beer Tray Drawing (Spec Sheet)
20" Brass Surface Mount Drain Tray with Drain | 5" X 20" X 3/4
$ 200.84
20" Brass Surface Mount Drain Tray, with Drain
*Please allow 3 weeks for this product to ship*
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 16 ga. Brass #8 mirror finish. The corners and seams are welded and ground to a polished (mirror) high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
All exposed edges are deburred smooth for safety and appearances
The louvered Screen is Removable for Cleaning Made Easy
Brass # 8 Mirror Finish
Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Made in the USA!
Surface Mount Beer Tray Drawing (Spec Sheet)
30" Brass Surface Mount Drain Tray with Drain | 5" X 30" X 3/4
$ 244.55
Brass 5" X 30" X 3/4" Surface Mount Drip Tray with Drain
*Please allow 3 weeks for this product to ship*
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 16 ga. Brass #8 mirror finish. The corners and seams are welded and ground to a polished (mirror) high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
All exposed edges are deburred smooth for safety and appearances
The louvered Screen is Removable for Cleaning Made Easy
Brass # 8 Mirror Finish
Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Made in the USA!
Surface Mount Beer Tray Drawing (Spec Sheet)
36" Brass Surface Mount Drain Tray with Drain | 5" X 36" X 3/4
$ 262.06
Brass 5" X 36" X 3/4" Surface Mount Drip Tray with Drain
*Please allow 3 weeks for this product to ship*
The (SMD) Surface Mount with Drain style drip trays is designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 16 ga. Brass #8 mirror finish. The corners and seams are welded and ground to a polished (mirror) high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
All exposed edges are deburred smooth for safety and appearances
The louvered Screen is Removable for Cleaning Made Easy
Brass # 8 Mirror Finish
Hardware Included - Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.
Made in the USA!
Surface Mount Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 36" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 299.76
36" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 ga. Stainless Steel in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Metro Pass Through Tower 8 Faucet Holes | Stainless Steel #4
$ 497.91
Metro "H" Pass Through Draft Beer Tower - 8 Faucet Holes
*Please allow 1-2 weeks for this product to ship*
The Metro Pass Through Tower has two 4" diameter base tubes and a 3" diameter faucet tube. The Metro Pass Through Tower comes in Stainless Steel in #4 brushed finish. The Metro Pass Through Tower comes with Neoprene gaskets to aid in keeping product cold. Each Metro Pass Through Tower comes apart for ease of installation. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting.
Metro towers offer a phenomenal look!
All 304 stainless steel
Brushed Finish
Metro Pass Thru "H" Tower Drawing (Spec Sheet)
Draft Beer T- Tower | 3" Single Pedestal |12" Box | 4 Hole Face Plate | S/S # 8
$ 386.13
"T" Style Draft Beer Tower - 4 Faucets - Stainless Steel - Mirrored Finish
*Please allow up to 3 weeks for this product to ship*
T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #8 Mirror Finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 3" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959.
Face Plate is Removable for Quick Installation of Beer Lines
Made In the USA
Flanges on the pedestals are welded to the tubing = NO Dirt Catching =)
4 countersunk holes for mounting.
Stainless Steel in #8 Mirror Finish
T-Tower Drawing (Spec Sheet)
Draft Beer T-Tower |Double Pedestal| 36" Box| 12 Faucet Holes| SS #4
$ 697.92
Double Pedestal Draft Beer Tower - 12 Faucets - Stainless Steel
*Please allow up to 1 - 2 days for this product to ship*
T-Towers are designed to mount to one or more pedestals. Our Pedestals are 10" tall. T-Towers are made of 18 ga. Stainless Steel in #4 brushed finish. The removable faceplate is used to attach beer lines as easily as possible. T-Towers come with Styrofoam and Rubatex insulation and Neoprene gaskets to aid in keeping the product cold. Pedestals come in 4" diameter. The flanges on the pedestals are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. We supply the metal housing for that the beer lines go into. We do not include or sell taps or beer lines. We supply the suppliers of the Beer and Restaurant Industry with the finest stainless steel metal products since 1959.
Face Plate is Removable for Quick Installation of Beer Lines
Made In the USA
Flanges on the pedestals are welded to the tubing = NO Dirt Catching =)
4 countersunk holes for mounting.
Stainless Steel in #4 Brushed Finish
T-Tower Drawing (Spec Sheet)
Draft Arm 3" X 12" | 3 Faucet Draft Beer Tower Column Tower Brass
$ 250.69
Brass 3" Column Draft Beer Tower- 3 hole faucet beer tower.
*Please allow up to 3 weeks for this product to ship*
This Draft Arm (Draft Beer Tower) is a 3" X 12" Tower in Brass # 8 Mirror Finish. Our Draft Arms come with Rubatex insulation and a Neoprene gasket to aid in keeping the product cold. The removable cap makes it easy to assemble. The flanges are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. This column tower is for three faucets of draft beer.
Our Draft Arms WILL NOT catch dirt in our flange!
Brass Mirror Finish
Draft beer towers are a perfect solution for your home bar.
Made in the USA!
Rubatex insulation and a Neoprene gasket to aid in keeping the product cold.
Draft Beer Column Tower Drawing (Spec Sheet)
Draft Arm 3" X 12" | 3 Faucet Draft Beer Tower Column Tower S/S#8
$ 190.98
3" Column Draft Beer Tower - Polished Stainless Steel - 3 hole faucet beer tower.
*Please allow up to 1 - 2 days for this product to ship.
This Draft Arm (Draft Beer Tower) is a 3" X 12" Tower in Stainless Steel #8 Mirror Finish. Our Draft Arms come with Rubatex insulation and a Neoprene gasket to aid in keeping the product cold. The removable cap makes it easy to assemble. The flanges are welded to the tubing thus eliminating dirt catches and producing a smooth seamless joint. The flanges are press formed from a single piece of material and have 4 countersunk holes for mounting. This column tower is for three faucets of draft beer.
Our Draft Arms WILL NOT catch dirt in our flange!
Stainless Steel #8 Mirror Finish
Draft beer towers are a perfect solution for your home bar.
Made in the USA!
Rubatex insulation and a Neoprene gasket to aid in keeping the product cold.
Draft Beer Column Tower Drawing (Spec Sheet)
Wall Mount Drip Tray with Drain | 6-3/8" X 30" X 14" X 1" | S/S # 4 | 6 Faucet Holes
$ 318.15
30" Stainless Steel Wall Mount Drain Tray - 6 Faucet Holes
*Please allow 1-2 days for this product to ship*
The wall mount with drain (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage.
6 Faucet Holes
Made to hang on a wall, when a counter won't suffice
Drain to drain liquid out (Angled Bottom)
1/2" NPT Pipe Thread
Made in the USA!
All exposed edges are deburred smooth for safety and appearances.
The corners and seams are welded and ground to a brushed finish
Wall Mount Beer Tray Drawing (Spec Sheet)
