30" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 10 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 10 Faucet Holes Rinser Hole (Rinsers sold separately)  All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

8" Wide Stainless Steel Surface Mount Beer Drip Tray with Drain and Rinser Hole *Please allow up to 3 weeks for trays to ship* Surface Mount Drip Tray, 30" x 8" Stainless Steel Surface Mount Drip Tray with Drain and Rinser Hole  The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed Finish.  The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole.  Rinsers sold separately Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 8 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 8 Faucet Holes Rinser Hole (Rinsers sold separately)  All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 9 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 9 Faucet Holes Rinser Hole (Rinsers sold separately)  All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Mirror Finish Wall Mount Drain Tray with Rinser Hole - 8 Faucet Holes *Please allow 3 weeks for this product to ship* The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 8 Faucet Holes Rinser Hole (Rinsers sold separately) All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. Wall Mount Beer Tray Drawing (Spec Sheet)

8" Wide Mirror Stainless Surface Mount Beer Drip Tray with Drain and Rinser Hole *Please allow up to 3 weeks for trays to ship* Surface Mount Drip Tray, 30" x 8" Mirror Finish Stainless Steel Surface Mount Drip Tray with Drain and Rinser Hole   The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #8 mirror finish The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole. Rinsers sold separately Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Mirror Finish Wall Mount Drain Tray with Rinser Hole - 6 Faucet Holes *Please allow 3 weeks for this product to ship* The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 6 Faucet Holes Rinser Hole (Rinsers sold separately) All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. Wall Mount Beer Tray Drawing (Spec Sheet)

30" Brass Wall Mount Drain Tray with Rinser Hole - 10 Faucet Holes *Please allow 3 weeks for this product to ship* The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 16 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 10 Faucet Holes Rinser Hole (Rinsers sold separately) All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Brass #8 Mirror Finish  Made in the USA! All exposed edges are deburred smooth for safety and appearances. Wall Mount Beer Tray Drawing (Spec Sheet)

8" Wide Brass Surface Mount Beer Drip Tray with Drain and Rinser Hole *Please allow up to 3 weeks for trays to ship* Surface Mount Drip Tray, 30" x 8" Brass Surface Mount Drip Tray with Drain and Rinser Hole  The (SMD) Surface Mount with Drain style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to the surface using supplied hardware. Drip Trays are made of 16 ga. Brass in #8 mirror finish The corners and seams are welded and ground to a polished (mirror) finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 ga. perforated screen or a custom 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting and rinser hole. Rinsers sold separately Surface Mount Glass Rinser Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 4 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 4 Faucet Holes Rinser Hole (Rinsers sold separately)  All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 5 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 5 Faucet Holes Rinser Hole (Rinsers sold separately)  All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 6 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 gauge Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 6 Faucet Holes Rinser Hole (Rinsers sold separately)  All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Wall Mount Drain Tray with Rinser Hole - 7 Faucet Holes *Please allow 3 weeks for this product to ship* The wall mount with drain and rinser hole (WMD) style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. Wall Mounts are made of 18 Stainless Steel in #4 brushed finish. The front edge of the tray is hemmed for reinforcement. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 7 Faucet Holes Rinser Hole (Rinsers sold separately)  All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. The corners and seams are welded and ground to a brushed finish Wall Mount Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Mirror Finish Wall Mount Drain Tray with Rinser Hole - 4 Faucet Holes *Please allow 3 weeks for this product to ship* The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 4 Faucet Holes Rinser Hole (Rinsers sold separately) All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. Wall Mount Beer Tray Drawing (Spec Sheet)

30" Stainless Steel Mirror Finish Wall Mount Drain Tray with Rinser Hole - 5 Faucet Holes *Please allow 3 weeks for this product to ship* The WMD-style wall mounts are designed to mount to any suitable vertical surface and can be configured for multiple beer taps. The front edge of the tray is hemmed for reinforcement. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. 5 Faucet Holes Rinser Hole (Rinsers sold separately) All Rinser Trays and Sprayers require a Water Regulator (sold separately) Made to hang on a wall, when a counter won't suffice Drain to drain liquid out (Angled Bottom) 1/2" NPT Pipe Thread Made in the USA! All exposed edges are deburred smooth for safety and appearances. Wall Mount Beer Tray Drawing (Spec Sheet)