Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
Flush Mount with Rinser Hole 8" X 45" X ¾" Drip Tray | Recessed | S/S # 8
$ 510.50
45" Mirror Stainless Steel Flush Mount Drain Tray w/ Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain and Rinser Hole style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 gauge Stainless Steel in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount with Rinser Hole 8" X 48" X ¾" Drip Tray | Recessed | Brass
$ 779.46
48" Brass Flush Mount Drain Tray w/ Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with drain and rinser hole style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 gauge brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount with Rinser Hole 8" X 48" X ¾" Drip Tray | Recessed | S/S # 4
$ 424.74
48" Stainless Steel Flush Mount Drain Tray w/ Drain and Rinser Hole
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 18 gauge. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Rinser Hole (Rinsers sold separately)
Perforated Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount with Rinser Hole 8" X 48" X ¾" Drip Tray | Recessed | S/S # 8
$ 533.29
48" Mirror Stainless Steel Flush Mount Drain Tray w/ Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain and Rinser Hole style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 gauge Stainless Steel in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount with Rinser Hole 8" X 8" X ¾" Drip Tray | Recessed | Brass
$ 445.48
8" Brass Flush Mount Drain Tray w/ Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with drain and rinser hole style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 gauge brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount with Rinser Hole 8" X 8" X ¾" Drip Tray | Recessed | S/S # 4
$ 221.77
8" Stainless Steel Flush Mount Drain Tray w/ Drain and Rinser Hole
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain and Rinser Hole style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray comes with a standard 18 gauge. perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount with Rinser Hole 8" X 8" X ¾" Drip Tray | Recessed | S/S # 8
$ 289.48
8" Mirror Stainless Steel Flush Mount Drain Tray w/ Drain and Rinser Hole
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain and Rinser Hole style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 gauge Stainless Steel in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 18 gauge perforated screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Perforated Screen
Rinser Hole (Rinsers sold separately)
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Gift Card
from $ 10.00
Shopping for someone else but not sure what to give them? Give them the gift of choice with a ACU Precision Sheet Metal gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
Glass Kitchen Rinser - Mirror Finish
from $ 152.86
This kitchen rinser will rinse any glass, including plastic and glass wine glasses, with high-pressure water. This limits wasting water by rinsing out the glass in a sink with a traditional faucet. This is the water-saving futuristic way to rinse a glass. The Kitchen Rinser rinses residue in seconds with easy clean-up. Designed from our highly successful restaurant and bar equipment line of glass rinsers, where this kitchen rinser was inspired from cooling a glass down from our beer drip tray line to cleaning a normal glass. This rinser is designed for any sink where there is a water supply. Using the low profile design, only one countertop hole needs to be drilled to install into any standard countertop. If you have an existing kitchen faucet sprayer or soap dispenser you can install our kitchen rinser without drilling another countertop hole and is easily installed. Our drip pan wraps around your countertop, making the runoff water/residue dispense into your sink.
Rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI we recommend you buy our Water Pressure Regulator 50 PSI.
* CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN). TOO MUCH PRESSURE CAN CAUSE DAMAGE TO THE RINSER AND CAUSE IT TO FAIL. *
Water Regulator (Sold Separately)
Highlights of our Kitchen Rinser
Industrial quality designed for high repetitive use.
The thick 16 gauge T-304 mirror Stainless Steel pan is built to last a lifetime.
5" diameter will work on larger drinking glasses and as small as baby bottles.
Easily installed, sleek low profile design.
Replaceable glass rinser.
Rinser thoroughly rinses residue with a water jet that can reach where you can't.
Do not settle for plastic or smaller diameters like other units. This unit is designed for a commercial sink or a household kitchen sink.
The rinser is replaceable if needed and is interchangeable with our glass rinsers from our draft beer line. We offer the base in mirror-polished stainless steel. The glass rinser comes with a rinser push plate available in stainless steel (brushed and mirror finish), brass mirror finish, copper mirror finish, and even a plastic star option.
* Please allow 1 week to ship *
Stainless Steel Mirror Finish w/ Mirror Finish Push Plate Drawing Spec Sheet
Stainless Steel Mirror Finish w/ Plastic Star Push Plate Drawing Spec Sheet
Stainless Steel Mirror Finish w/ Mirror Brass Push Plate Drawing Spec Sheet
Stainless Steel Mirror Finish w/ Mirror Copper Push Plate Drawing Spec Sheet
Optional way to plumb the Kitchen Glass Rinser depending on glass rinser setup
Kitchen Counter Tray Template
Glass Rinser for Draft Beer Drip Trays S/S#4
$ 79.17
Solid Metal Replacement Rinser with Stainless Steel perforated grid.
Please allow up to 1-2 days for this product to ship*
Our rinsers are designed to handle up to 60 PSI. If you have more than 60 PSI, we recommend you purchase our Water Pressure Regulator 50 PSI.
*CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR WITH HARD WATER (NOT CLEAN) CAN DAMAGE THE RINSER AND CAUSE IT TO FAIL *
Water Regulator (Sold Separately)
Glass Rinser Drawing (Spec Sheet)
Glass Rinser Riser Washer
$ 1.00
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
Achieve the ideal height for any tray depth with our precision Glass Rinser Riser Washer.
Dimension of Glass Rinser Riser Washer - 1-1/4" with 7/8" I.D. center hole and measures 1/16" in thickness. Glass rinser riser washer is constructed using 16-gauge Stainless Steel T-304 for durability and corrosion resistance.
3/4" Deep Tray - Qty. 0 Required
1" Deep Tray - Qty. 0 Required
1-1/4" Deep Tray - Qty. 4 Required
1-1/2" Deep Tray - Qty. 8 Required
2" Deep Tray - Qty. 16 Required
* PLEASE ALLOW 1-2 DAYS TO SHIP *
Rinser Riser Washer Spec Sheet
Jayco Seneca | Entegra Accolade Step Well Cover (S2RV)
$ 225.00
*Please allow up to 1 week for this product to ship*
Enjoy peace of mind with this must-have addition for your RV. Experience worry-free travels with the Jayco Seneca and Entegra Accolade RV Step Well Cover. This durable aluminum cover provides added safety, protecting pets and children from potential falls or accidents. Easy to install, it creates a stable and secure platform, giving you peace of mind and ensuring you'll never fall into your stairwell again. Don't leave home without this essential addition to your RV, and enjoy all your adventures without a single worry. Stronger than wood and plastic, without worry about tripping over a high lip with our step well cover.
Made in the USA!
All exposed edges are deburred and smoothed for safety and appearance.
Light and Strong - One Piece with NO welding!
The maximum weight-bearing capacity is 300 lbs.
Low-profile transition from your floor compared to wood or plastic.
Paintable and/or able to be decorated how you would like.
This was designed on an S2RV chassis. S2RV chassis from Freightliner has been used since 2018.5 to the present. We ask that everyone measure their step well before purchase due to the errors in production from Jayco/ Entegra (Thor). The inside measurement of the inner step well should be 26" by 26."
If you order without measuring, there will be a restocking fee, and you will be responsible for shipping if fitment is not correct.
We can make a custom one. Please give us a call at 951-943-1495. If we find a certain model is the same and popular, we would consider making it an item on our website.
If you measure your stepwell and it is the same size with a different chassis, please let us know by emailing us or leaving a note during checkout!
RV Step Cover Spec Sheet
Jockey Box | Wall Mounted Drip Tray | Brass Mirror Polished
$ 213.66
6" Brass Draft Beer Wall Mount Drip Tray, With Drain
*Please allow 3 weeks for this product to ship*
The Jockey Box style wall mounts are designed to mount to any suitable vertical surface using shank of beer tap to secure. Wall Mounts are made of 16 ga. Brass #8 mirror finish. The corners and seams are welded and ground to either a brushed or polished (mirror) high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drain tubes are 1/2" x 1" smooth tube type.
Brass stainless steel construction.
Welded corners, finished smooth for safety and appearance.
Fast draining, precision louvered screen.
Lift out screen makes cleaning easy
Center mounted drain, 1-3/4" x 1/2" N.P.T. perfect for plumbing with PVC directly to a drain.
Great Value and build quality compared to our competition!
Jockey Box Wall Mount Beer Tray Drawing (Spec Sheet)
Jockey Box | Wall Mounted Drip Tray | Mirror Stainless Steel
$ 133.78
6" Mirror Stainless Steel Draft Beer Wall Mount Drip Tray, With Drain
*Please allow 3 weeks for this product to ship*
The Jockey Box style wall mounts are designed to mount to any suitable vertical surface using shank of beer tap to secure. Wall Mounts are made of 18 ga. Stainless Steel #8 mirror finish. The corners and seams are welded and ground to either a brushed or polished (mirror) high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drain tubes are 1/2" x 1" smooth tube type.
Mirror stainless steel construction.
Welded corners, finished smooth for safety and appearance.
Fast draining, precision louvered screen.
Lift out screen makes cleaning easy
Center mounted drain, 1-3/4" x 1/2" N.P.T. perfect for plumbing with PVC directly to a drain.
Great Value and build quality compared to our competition!
Jockey Box Wall Mount Beer Tray Drawing (Spec Sheet)
Jockey Box | Wall Mounted Drip Tray | SS #4
$ 90.12
6" Stainless Steel Draft Beer Wall Mount Drip Tray, With Drain
*Please allow 2-3 days for this product to ship*
The Jockey Box style wall mounts are designed to mount to any suitable vertical surface using a shank of beer tap to secure. Wall Mounts are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished (mirror) high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drain tubes are 1/2" x 1" smooth tube type.
Robust 18 gauge stainless steel construction.
Welded corners, finished smooth for safety and appearance.
Fast draining, precision louvered screen.
Lift out screen makes cleaning easy
Center-mounted drain, 1-3/4" x 1/2" N.P.T. perfect for plumbing with PVC directly to a drain.
Great Value and build quality compared to our competition!
Jockey Box Wall Mount Beer Tray Drawing (Spec Sheet)
