Draft Beer Drip Trays
- Bevel Edge
- Surface Mount
- Flush Mount "Recessed"
- Built In Rinser Hole
- Shadow Boxes
- Wall Mounted
- Wrap Around
Draft Beer Towers
Draft Beer Accessories
Other Products
Drain Top Stainless Steel Restaurant Table | 30" X 24" | Left Drain * CONTACT US TO PURCHASE *
$ 274.00
*** CONTACT US TO PURCHASE ***
Drain Top Stainless Steel Restaurant Table with Left Drain
*Please allow up to 1-2 days for this product to ship*
Our Tables are constructed with .060" thick Aluminum sides and shelves pop riveted to 16 ga. Galvanized Steel rear panel, inner top and supports. All front edges faced with 20 ga. Stainless Steel #4 Brushed finish material. All Tables come with durable adjustable Stainless Steel legs. The outer top is constructed from 20 ga. Stainless Steel #4 Brushed finish. Our Tables are available in Flat Top or Drain Top styles. The Drain Top style comes with a removable Louvered Screen and has a 1.0" X 1 1/2" NPT Pipe Nipple drain with an angled bottom tray for drainage.
Perfect for the food service industry!
Made in the USA!
Able to drain out liquid from dispensers!
Comes with a Louvered Screen for Draining Dispenser Liquid
Drain Top Table Drawing (Spec Sheet)
Drain Top Stainless Steel Restaurant Table | 36" X 24" | Right Drain
$ 288.00
*** CONTACT US TO PURCHASE *** Drain Top Stainless Steel Restaurant Table with Right Drain
*Please allow up to 1-2 days for this product to ship*
Our Tables are constructed with .060" thick Aluminum sides and shelves pop riveted to 16 ga. Galvanized Steel rear panel, inner top and supports. All front edges faced with 20 ga. Stainless Steel #4 Brushed finish material. All Tables come with durable adjustable Stainless Steel legs. The outer top is constructed from 20 ga. Stainless Steel #4 Brushed finish. Our Tables are available in Flat Top or Drain Top styles. The Drain Top style comes with a removable Louvered Screen and has a 1.0" X 1 1/2" NPT Pipe Nipple drain with an angled bottom tray for drainage.
Perfect for the food service industry!
Made in the USA!
Able to drain out liquid from dispensers!
Comes with a Louvered Screen for Draining Dispenser Liquid
Drain Top Table Drawing (Spec Sheet)
Drain Top Stainless Steel Restaurant Table | 48" X 24" | Left Drain
$ 323.00
$ 710.81
*** CONTACT US TO PURCHASE ***
Drain Top Stainless Steel Restaurant Table with Left Drain
*Please allow up to 1-2 days for this product to ship*
Our Tables are constructed with .060" thick Aluminum sides and shelves pop riveted to 16 ga. Galvanized Steel rear panel, inner top and supports. All front edges faced with 20 ga. Stainless Steel #4 Brushed finish material. All Tables come with durable adjustable Stainless Steel legs. The outer top is constructed from 20 ga. Stainless Steel #4 Brushed finish. Our Tables are available in Flat Top or Drain Top styles. The Drain Top style comes with a removable Louvered Screen and has a 1.0" X 1 1/2" NPT Pipe Nipple drain with an angled bottom tray for drainage.
Perfect for the food service industry!
Made in the USA!
Able to drain out liquid from dispensers!
Comes with a Louvered Screen for Draining Dispenser Liquid
Drain Top Table Drawing (Spec Sheet)
Drain Top Stainless Steel Restaurant Table | 72" X 24" | Left Drain
$ 536.00
*** CONTACT US TO PURCHASE ***
Drain Top Stainless Steel Restaurant Table with Left Drain
*Please allow up to 1-2 days for this product to ship*
Our Tables are constructed with .060" thick Aluminum sides and shelves pop riveted to 16 ga. Galvanized Steel rear panel, inner top and supports. All front edges faced with 20 ga. Stainless Steel #4 Brushed finish material. All Tables come with durable adjustable Stainless Steel legs. The outer top is constructed from 20 ga. Stainless Steel #4 Brushed finish. Our Tables are available in Flat Top or Drain Top styles. The Drain Top style comes with a removable Louvered Screen and has a 1.0" X 1 1/2" NPT Pipe Nipple drain with an angled bottom tray for drainage.
Perfect for the food service industry!
Made in the USA!
Able to drain out liquid from dispensers!
Comes with a Louvered Screen for Draining Dispenser Liquid
Drain Top Table Drawing (Spec Sheet)
Economy Draft Arm 3" X 12" | 3 Faucet Draft Beer Tower Column Tower S/S # 6
$ 85.78
"Economy" Draft Arm 3" X 12" Tall | 3 Faucet Hole Draft Beer Tower Column Tower S/S # 6
*Please allow up to 2 weeks for this product to ship*
This Draft Arm (Draft Beer Tower) is a 3" X 12" Tower in Stainless Steel #6 Brushed Finish. The removable cap makes it easy to assemble. The flanges are welded to the tubing. The flanges have 4 countersunk holes for mounting. This is our Economy Model that is a popular seller that is still made of good quality. Our standard Draft Beer Column Tower can be found online as well (our standard tower has the seamless joint) this tower does not. This column tower is for three faucets of draft beer.
Stainless Steel # 6 Finish
Made in the USA!
Draft beer Column towers are a perfect solution for your home bar
Elbow Column Draft Beer Tower | Smoke Stack Beer Tower
$ 853.03
Angle Elbow Draft Beer Column Tower/ Draft Arm
*Please allow up to 2 weeks for this product to ship for Stainless Steel*
Our Smoke Stack™ draft beer elbow column tower is a beautiful tower that is designed to have tap handles to stand away from the tower. Unlike the traditional column towers, the beer faucet holes are angled inspiring a custom look. These towers are 4" inch tubing and use ACU Precision Sheet Metals beer Bridge Tower parts to make this custom column beer tower.
Made in the USA!
Flat Top Stainless Steel Restaurant Table
$ 439.93
Flat Top Stainless Steel Restaurant Table
*Please allow up to 4-6 weeks for this product to ship*
Our Tables are constructed with .060" thick Aluminum sides and shelves pop-riveted to 16 ga. Galvanized Steel rear panel, inner top, and supports. All front edges faced with 20 ga. Stainless Steel #4 Brushed finish material. All Tables come with durable adjustable Stainless Steel legs. The outer top is constructed from 20 ga. Stainless Steel #4 Brushed finish. Our Tables are available in Flat Top or Drain Top styles. The Drain Top style comes with a removable Louvered Screen and has a 1.0" X 1 1/2" NPT Pipe Nipple drain with an angled bottom tray for drainage.
Perfect for the foodservice industry!
Made in the USA!
Able to drain out liquid from dispensers!
Comes with a Louvered Screen for Draining Dispenser Liquid
ACU Flat Top Table Drawing (Spec Sheet)
FloJet In-Line Water Pressure Regulator 50 PSI
$ 69.98
*** FOR USE ONLY WITH GLASS RINSER (ACU#40098, 80098, 60098, 90098, 40097, AND KITCHEN GLASS RINSER ASSEMBLIES ***
* PLEASE ALLOW 1-2 DAYS TO SHIP *
FloJet In-Line Water Pressure Regulator - 1750302C. For draft beer drip trays with rinser holes. View all Draft Beer Drip Trays with Rinser Holes.
This is a FloJet Water Regulator that is sold by ACU Precision Sheet Metal. This water regulator has a built-in check valve that reduces inlet water pressure to a safe level for use with all Glass Rinser Trays. The pressure Regulator comes complete with a removable, cleanable inlet screen. The unit is pre-set from the factory at 50 PSI and uses standard plumbing connections.
* CAUTION USING THE RINSER WITH TOO MUCH WATER PRESSURE OR HARD WATER (NOT CLEAN) CAN CAUSE DAMAGE AND RESULT IN THE GLASS RINSER FAILING. *
New Column
New Column
Length
7-1/2"
Hose Connection
1/2" NPT Male with 7/16" O.D Nipple
Inside Diameter
1/4" I.D.
Outside Diameter
1-5/8"
Pressure
Pre-set at 50 PSI
Operating Temp
33° to 150°F
Inlet water pressure
150 PSI Max
Certification
NSF
Water Regulator Drawing (Spec Sheet)
Detail Photo of Water Regulator
Flush Mount 5" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | Brass
$ 212.69
12" Brass Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD-style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in the #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearance. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 121.41
12" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 12" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 149.00
12" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 2 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 ga. Stainless Steel in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 16" Drip Tray | Beer Dispenser Catcher | S/S # 4
$ 139.59
16" Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 16" X ¾" Drip Tray | Beer Dispenser Catcher | S/S # 8
$ 167.31
16" Mirror Stainless Steel Flush Mount Drain Tray, w/ Drain
*Please allow 3 weeks for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 18 ga. Stainless Steel in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
Stainless Steel #8 Mirrored Finish
Our FMD has a Drain for the liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 16" X ¾" Drip Tray | Recessed Beer Tray | Brass
$ 235.48
16" Brass Flush Mount Drain Tray, w/ Drain
*Please allow 1-2 days for this product to ship*
The FMD style drip tray is designed to mount flush to any surface with a relieved opening. Flush Mounts are made of 16 ga. brass in #8 Mirror finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray is available with a standard 20 ga. louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. This Flush Mount also has an angled bottom for drainage.
High-quality Brass
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
Flush Mount 5" X 24" Drip Tray with Double Drains | Recessed | S/S # 4
$ 211.80
24" Stainless Steel Flush Mount Drain Tray, w/ Double Drains
*Please allow 3 weeks for this product to ship*
The Flush Mount with Drain (FMD) style drip trays are designed to mount flush to any surface with a relieved opening. Drip Trays are made of 18 gauge Stainless Steel in #4 brushed finish. The corners and seams are welded and ground to either a brushed or polished high finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 gauge louvered screen. Drains are 1 1/2" long, 1/2" NPT Pipe Thread. Angled bottom for drainage. We supply the suppliers of Restaurant and Bar Equipment.
Stainless Steel #4 Brushed Finish
Our FMD has a Drain for liquid to run down - 1/2 NPT pipe thread.
Made in the USA!
Deburred Smooth for Safety
Louvered Screen
Double Drains
Flush Mounted "Recessed" Beer Tray Drawing (Spec Sheet)
